If your bird feeder gets squirrel damage, you’ve probably realized by now that it’s not a good idea to leave the feeder unattended. The feeder needs constant supervision.
One way to solve the problem is to build a baffle. A baffle is a piece of material that prevents squirrels from getting to the food. Squirrel baffles can be used anywhere that squirrels can get to the food, but they usually are most effective at protecting the feeder from squirrels. A squirrel baffle is a device that blocks squirrels from reaching bird feeders and you can even make it on your own without spending too much time and money. Here are 15 DIY squirrel baffle projects that are cheap and fully functional.
Instead of fastenings, these DIY squirrel baffle projects are constructed from sturdy wire screens. By placing this screen between two posts, the squirrels can’t climb up and take down bird feeders. All the projects listed in this article won’t harm squirrels in any way, so there’s no need to be concerned about that. Are you ready to build? Let’s begin.
From Which Material you can make DIY Squirrel Baffle Ideas:
- The DIY squirrel baffle projects are often made of plywood or sheet metal and are placed over the top of the feeder.
- This baffle can be attached using screws or glue.
- The baffle is the cheapest and most straightforward way to safely introduce squirrels to the concept of keeping away from bird feeders. The best squirrel baffles are made from chicken wire. Chicken wire is available from most home supply stores and is readily available at most hardware or home improvement stores.
- You can also make squirrel baffles from solid lumber.
- A baffle doesn’t need to be fancy. Simple, square, or rectangular baffles are often more effective.
- Squirrel baffles can be as simple as a single piece of chicken wire.
Other Projects
DIY Squirrel Baffle Bird Feeder:
This DIY squirrel baffle can be built to your specifications or ours. When you set it up, the cage bars prevent the squirrel from reaching the feeder. The stovepipe can be held in place by an end cap attached with the sheet metal screws and hose clamps so that it cannot fall over in a strong wind. Now you can build your own DIY Squirrel Baffle Bird Feeder right at home. The stove pipe-you can get at a hardware store. The end cap- it comes with the pipe. Sheet metal screws for assembly, hose clamps for attaching it to trees, screwdriver for assembly make this project very simple to make indeed.
A DIY Squirrel Baffle bird feeder saves money, and yet it takes simple materials. The baffle works so well! The squirrel baffle is made of a stovepipe, stove pipe end cap, sheet metal screws, hose clamps, screwdriver, drill, vise, and drill bits. This simple tool can easily be made at home. You need to know how to use a screwdriver properly and have the necessary tools. To make this bird feeder, you need to know how to use a screwdriver so it will not be difficult for you. You also need some essential tools that are commonly used in your home.
DIY Squirrel Baffle:
A squirrel baffle is a contraption that you build around an existing squirrel-proof bird feeder using common household items to scare the squirrels away. This way, you don’t have to remove the current bird feeder that you have. You can also get a new, more efficient squirrel-proof or proofed bird feeder that has been specifically designed to deter the squirrels from eating all of the pretty little bird food.
Following this technique is the best method to discourage squirrels from getting to your bird feeders. For a permanent solution, you need to make a squirrel baffle and nothing more. The following techniques describe different methods that have been used successfully by other birders. Your problem might be solved with a squirrel baffle, especially if the roof or tall branches of a tall tree are close to or touching your feeder. This is the best and most economical solution you can try, and it works well for many people.
Making A Squirrel Baffle:
Decorate your backyard or front yard by creating a squirrel baffle. The first step is to have a plan. Materials are an important part of the project because you want to make sure the squirrel baffle is cut up well and completed correctly. Other materials will include small pieces of an artificial tree, silicone sealant, silicone waterproof boards, wood glue, screwdriver and nails, paint brushes, acrylic paint markers to decorate the tree, and other things you might like to decorate it with.
Teaching your children how to make decorations like this can be fun for them as well as give them a sense of doing things correctly. Before you start your project, you might need to paint some of the wood with primer. Plan how big you want the squirrel baffle to be. Well, according to the size of your garden, measure the wood and cut it using the saw. This is not an easy task; make sure that you make precise measurements. You might be lucky to have someone good at woodwork do this job for you.
$1 Squirrel Baffle
Squirrel Proof Bird Feeder DIY:
Always put the squirrel forward when building a bird feeder. This way, you build a flexible bird feeder that will accommodate small birds and big birds alike. Building your own bird feeder is fun, but you have to be careful when it comes to squirrels. If you build a bird feeder, the squirrel will find ways of climbing up there, so your birds do not have food. Among the many things, you will need when building a bird feeder would be garden tape for stringing your bird feeder, wood screws, or nails to hold the wooden pieces together.
If you want to be able to hang your bird feeder from a tree, you must include a chain and a hook at the bottom of your project. In addition, you will need a ruler to measure the right size of each piece you are using for your feeder. Another important thing that you will require is wood glue so that the wooden pieces remain together properly.
How to Build a "Flexi-Perch'' Squirrel-proof Bird Feeder for $10 or Less:
Some birds also get tired of the pesky squirrels spoiling their food. A squirrel baffle is a cost-effective way to prevent this. Squirrels are usually not dangling around bird feeders all the time. They just come in when they feel like it or when they are in search of something ― which makes it tough to determine the best placement for the baffle in order to deter all of these unwanted visitors. On the other hand, what you need to do is to feed them so that they can eat well and grow big so that they will move to the wild where they belong. However, what really bothers you is how these Squirrels get into your bird feeder. Luckily for you, some feeders are made just for them. They are made to be able to feed even if there are these pesky Squirrels around.
Materials: 4" diameter plastic drain pipe, ½ " PVC coupler, PVC glue, 4" PVC cap, ⅜" sheet metal screw, 10 gauge galvanized wire, 6" cable ties, and woodblock.
How To Make A Squirrel Baffle
DIY Squirrel Baffle
DIY Soda Bottle Squirrel Baffle
In the video, there were two different methods created by the creator to make a squirrel baffle. The baffle he created in the first method was not effective because the squirrel managed to eat through it quite easily. Therefore, to make his product more functional, he made another version. In this second version, he removed some of the strips to make it thinner and still block off the food from going inside. He tested his new version in a container filled with peanuts and a suspicious squirrel came by looking for food. Just, cut the plastic bottle in half, make strips using the half; secure the two halves together by use of glue or melting it. You can then keep this bottle on the floor next to the wall. When you find that hedgehog living between your walls, use this DIY squirrel baffle to catch it.
How To Make A Squirrel Baffle
The most common method of protecting a bird feeder from interested squirrels is with a wire mesh cage. However, wires can be tough for birds to perch on and tough for squirrels to climb through. In this video, a baffle lid made from a stovepipe was used. Here's how it is done: Cut a hole in the middle of the stove pipe lid to fit a 2×4 piece of wood that is a little larger than the 2×4. This way the lid will fit snugly around the piece of wood without needing any additional fasteners. Make sure there aren't any sharp edges left. The kitchen stove pipe is used as a baffle.
The simplest and cheapest thing to do is to keep the squirrels away from your bird feeder which should be out of their reach. Materials needed: stovepipe, stove pipe lid; screws; 2×4 and 2×6; pressure-treated wood. The baffle can be adjusted by sliding it up or down on the pipe. The gap between the top of the stove pipe and the bottom of the lid is just the right size for a squirrel using its arm to reach in from outside of the feeder hood.
DIY Bird Feeding Station With Squirrel Baffle:
In order to keep away pesky squirrels from bird feeders, this DIY project will show you how to create a feeding station with a Squirrel Baffle. This project is done using a piece of PVC pipe, and a Squirrel Baffle made from a discarded water heater sink. Simply locate the bird feeder away from any trees or roofs that allow the squirrels to jump on top of the feeder, and this project is an easy way to keep them away from the food. Once you position the bird feeder away from any trees or roof, all you need is to prepare the cone and attach it to the bottom of the feeder. If, at any time, you do not like the looks of the cone driving you crazy…simply take it away and put it back after a few days.
How To Make A $1 Squirrel Baffle
DIY Squirrel Baffle With $1 Bowl
How To Make A Squirrel Proof Bird Feeder
If you have a garden with a bird feeder in it, then you probably would like to keep the squirrels out of it. A simple and very inexpensive way to keep these critters out of your bird feeder is to make a 'squirrel baffle' for the feeder. A simple, refined plexiglass sheet can be transformed into such a baffle. This baffle's entire design and implementation process is pretty simple and straightforward, and the product that we end up making is fully functional and can easily turn away squirrels.
To make this baffle for squirrels, you need to use plexiglass, plastic or metal sticks, electrical tape that electricians use for wire insulation, silicone adhesive that is a medical grade that is used for sealing skin incisions. To make this great baffle, all you need to do is to cut plexiglass into the shape of the square top of the bird feeder. This project is intended for those who want to put a pleasant surprise at the expense of the squirrels and birds.